Table of Contents
Advertisement
Installation and Configuration
Configuration Errors
This field provides several choices about the situations under which the BIOS should
wait for user input if a configuration error is found. The selections are:
1) Halt on all errors
2) Ignore all errors
3) Ignore keyboard errors (allows operation without a keyboard)
4) Ignore disk errors
5) Ignore keyboard and disk errors
Diskette Drive
This field gives you several choices about the type of floppy disk drives installed as
the A and B drives. Toggle the entry to match the type of diskette drive(s) attached.
If no floppy drive is attached, select NONE for each diskette drive field.
Fixed Disk Drive
This display-only field shows the type of disk selected from the fixed disk menu.
Possible values are None, AT and EXM FLASH. To see the detailed characteristics
of the device or to change the device, use the F3 function key to go to the fixed disk
menu. See the section Fixed Disk Menu, page 10. EXM-16 SCSI and EXM-17
PCMCIA adapter users who will be booting from devices attached to these adapters
should set the Fixed Disk Drive type to None.
COM1/COM2
Toggling these fields enables or disables the COM1 and COM2 ports.
Cache
Toggling this field enables or disables the cache. The default is to enable the cache.
Quick Boot
This field enables or disables the quick boot option. When quick boot is disabled, the
system displays the results of the POST and runs the memory test. When quick boot
is enabled, the system runs the POST except the memory test and displays "Quick
boot enabled: disable through Setup screen to view."
Available EXM Slots
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
2
Page 7
2
Advertisement
Table of Contents
