Table of Contents
Advertisement
2. Installation and
Configuration
Before installing the EPC-23, unpack and inspect it for shipping damage.
DO NOT REMOVE THE MODULE FROM ITS ANTI
UNLESS YOU ARE IN A STATIC
LIKE MOST OTHER ELECTRONIC DEVICES
.
DAMAGE
ESD DAMAGE IS NOT ALWAYS IMMEDIATELY OBVIOUS
IN THAT IT CAN CAUSE A PARTIAL BREAKDOWN IN SEMICON
DUCTOR DEVICES THAT MIGHT NOT IMMEDIATELY RESULT IN A
.
FAILURE
ENSURE THAT THE INSTALLATION PROCESS AS DESCRIBED HEREIN
IS ALSO PERFORMED IN A STATIC
Insertion in an EXM Carrier
Insertion of the EPC-23 into an EXM carrier is straightforward. Remove a blank
EXM panel from the carrier (by unscrewing the thumbscrews) and insert the
EPC-23 into the card guides. Firmly press the EPC-23 front panel to ensure that the
module is properly seated in the subplane and secure it with the thumbscrews.
MAKE SURE THAT POWER TO YOUR SYSTEM IS OFF
NOT DESIGNED TO BE INSERTED OR REMOVED FROM A LIVE
.
SYSTEM
WHEN INSERTING THE EPC
,
BOARD
AND MAKE SURE THE ENVIRONMENT IS STATIC
INSERT IT WITH ADEQUATE CONTINUOUS FORCE RATHER THAN
TAPPING OR HAMMERING ON IT
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
-
STATIC BAG
-
.
-
FREE ENVIRONMENT
THE EPC
23
,
IS SUSCEPTIBLE TO ESD
-
.
FREE ENVIRONMENT
.
-
THE EPC
23 IS
-
,
23
AVOID TOUCHING THE CIRCUIT
-
.
FREE
.
2
,
,
-
Page 3
2
Advertisement
Table of Contents
