MIDI Thru/Out Hookup
The MIDI Thru/Out jack can have its function changed via software (see
section 5.4). When MIDI Thru is turned on, this jack carries a duplicate
of the MIDI data appearing at the MIDI In jack. In addition to the Thru
function, the Thru/Out jack can then feed the MIDI In of other MIDI-
controlled unit, thus distributing the MIDI signal to two different units.
In addition to the Thru function, data generated by the QuadraVerb GT
can be sent to other MIDI units. This is more of a feature for advanced
MIDI users and is described in sections 5.5 and 5.6 on QuadraVerb GT
System Exclusive options (for more information on System Exclusive
information, see the MIDI supplement). Generally, the data generated
from the QuadraVerb GT is used for one of two purposes:
¥ Transfer program data directly from one QuadraVerb GT to another.
¥ Send program data to a such as the Alesis DataDisk or other MIDI
storage device in order to back up the data inside the QuadraVerb GT.
1.9 ROCK OUT!
Play for a while and get a feel for how the QuadraVerb GT sounds. The
factory programs give a good idea of what the QuadraVerb GT can do,
and can also be modified later on if you want to customize the factory
programs to your own specifications.
MIDI In
MIDI Thru/Out
MIDI In
MIDI Out
Footswitch
13