Preamp > Eq > Tremolo/Panning > Pitch > Delay > Reverb - Alesis GT Reference Manual

#1 Preamp > EQ > Tremolo/Panning > Pitch > Delay > Reverb
INPUT
PREAMP
QuadModeª is a complex configuration that offers comprehensive
switching and mixing possibilities. ItÕs excellent for creating larger-than-
life, animated sounds.
The Pitch module can switch its input between the preamp or EQ signals.
The Delay moduleÕs Delay Input Mix control chooses a blend between
the output of the Pitch module, or the preamp or EQ signal (as selected
by the Delay Input 1 switch).
The Reverb moduleÕs Reverb Input Mix control chooses a blend between
two input options. Reverb Input 1 switches between preamp, EQ, pre-
Delay, or post-Pitch signals; Reverb Input 2 switches between the post-
Delay or post-Pitch signal.
Panning and Tremolo are available in this configuration, and are in
series with the preamp or EQ signal line. The Preamp Signal Pre/Post EQ
switch chooses whether the Preamp Output comes from preamp or EQ.
Configuration 1
Pitch
Delay
Input
Input 1
EQ
Preamp
PITCH
Pre/Post EQ
EQ
Output
Pitch
PANNING
Output
&
TREMOLO
21
Mono
Stereo
Reverb
Delay
Input 1 Reverb
Input Mix
Input Mix
REVERB
Reverb
Input 2
DELAY
Reverb
Delay
Output
Output
Pre-Amp Signal
Effects
Output
OUTPUT
Direct Output