Delay Input Mix (Configs 1, 2, 4, 6, 7); Delay Time (Configs 1, 2, 3, 4, 6, 7) - Alesis GT Reference Manual

Delay Input Mix (configs 1, 2, 4, 6, 7)

The display shows:
The lower line shows the blend between the signal selected by Delay
Input 1 and one of several module outputs, depending on the
configuration:
Configurations 1, 4 Pitch
Configuration 2
Configuration 6
Configuration 7
When set to 00, the signal sources selected in Delay Input 1 and the
module output are mixed equally into the delay.
Larger numbers with the arrow pointing toward 1 indicate that more of
the signal from Delay Input 1 will be selected. When set to ¬99, only the
signal from Delay Input 1 will feed the delay.
Larger numbers with the arrow pointing toward the module name
indicate that more of the signal from the module output will be selected.
When set to 99®, only the module output will feed the delay.

Delay Time (configs 1, 2, 3, 4, 6, 7)

With Mono or Ping Pong selected as the delay type, the display shows:
With Stereo selected, this will say LEFT DELAY TIME. This sets the time
between successive delay signals, and is variable in 1 ms increments
from 1 millisecond to the maximum delay available in the
configuration.
As mentioned under Delay Type, the maximum delay depends on the
selected reverb type and the configuration.
DELAY INPUT MIX:
1 ¬ 0 0® (MODULE)
Lezlie
Ring Modulator
Resonator
DELAY TIME:
3 00 milliseconds
45