Bass Boost; Cabinet Simulator; Effect Loop - Alesis GT Reference Manual

cut). Both the Preamp Tone and Bass Boost parameters can be used to
shape the initial sound of your tone, while the EQ and/or Resonators
(see section 4.8) can be used for fine tuning.

Bass Boost

The display says:
Set to On for a fuller, bassier sound. Otherwise, set to Off. The Bass Boost
can also be used to get a fuller sound at low volumes.

Cabinet Simulator

The display says:
Much of the sound of an electric guitar doesn't come from effects or the
power amp, but from the sound of the speaker cabinet. When feeding a
recording console or PA, choose either Cabinet 1 (sounds like two 10Ó
speakers) or Cabinet 2 (simulates a cabinet with four 12Ó speakers). When
using the QuadraVerb GT with a standard guitar amp, leave this set to
Off. However, if you like the sound of the cabinet simulators while using
a guitar amp, it's perfectly OK to use these settings. You be the judge.

Effect Loop

The display says:
The QuadraVerb GT's Effect Loop is designed to let you insert other
signal processing devices into your signal chain. The effect send and
return jacks also allow you to use the analog and digital sections
independently as described in section 2.1.
BASS BOOST:
O N
CAB SIMULATOR:
O N
EFFECT LOOP:
I N
35