Front Panel Playback; Audio Trigger Playback - Alesis GT Reference Manual

Front Panel Playback

1. Press the DELAY button. The lower display line shows either ONE
SHOT or LOOPING:
ONE SHOT means that once a sample is initiated, it will play until
the end of the sample and then stop. If you want to play back the
sample continuously until you tell it to stop, select LOOPING.
2. To begin playback, press the EQ button. The sample will play to the
end and then automatically stop. To play back again, press EQ again.
If you selected LOOPING in step 1, push the EQ button to stop sample
playback.
3. Use the OUTPUT control to increase or decrease the sample volume.

Audio Trigger Playback

1. Press the DELAY button. The display says:
2. Press the VALUE UP button until the display reads:
Any incoming audio signal that passes the threshold (makes the -
18dB LED light) will cause the sample to play.
Notes
¥ The recorded sample can still be manually played back by pressing the
EQ button.
SAMPLE PLAYBACK:
O NE SHOT
SAMPLE PLAYBACK:
O NE SHOT
SAMPLE PLAYBACK:
A UDIO TRIGGER
92