Editing Mix Parameters; Direct Signal Level; Master Effects Level; Preamp Level - Alesis GT Reference Manual

4.19 EDITING MIX PARAMETERS

(config 6)
Configuration 6 offers separate mix levels for the Ring Modulator, Delay,
and Reverb modules, along with master/direct mix levels.

Direct Signal Level

The display says:
This sets the level for the direct signal path. Use this and the Master
Effects level control to balance the levels of the straight and processed
signal paths.

Master Effects Level

The display says:
This sets the master volume for all the effects module outputs. Use this
and the Direct signal control to balance the levels of the straight and
processed signal paths.

Preamp Level

The display says:
This mixes the preamp output signal into the master effects buss. Note
that this level is dependent on the Preamp Output level found in the
Preamp module.
DIRECT LEVEL:
5 0
MASTER EFFECTS
LEVEL: 0 0
PREAMP LEVEL:
9 9
85