Reverb Gate Release Time (configs 1, 2, 5, 6, 7)
The display shows:
This parameter determines the period of time (00-99) over which the
gate closes. 00 gives an extremely sharp cutoff; 99 gives a more gradual
decay.
Reverb Gated Level (configs 1, 2, 5, 6, 7)
The display shows:
The gate does not have to close to a zero level. This parameter sets the
final gate level, from 00 (complete gating action; no residual reverb
sound) to 99 (no gating action; reverb sound only).
4.5 EDITING DELAY PARAMETERS
Delay Type (configs 1, 2, 3, 4, 6, 7)
There are four different types of delay.
¥ Mono Delay This sends the same delay signal to both output
channels. The maximum delay depends on the chosen configuration:
Configurations 1, 2, 6
Configurations 3, 4
Configuration 7
REVERB GATE
RELEASE TIME:
REVERB GATED
LEVEL:
0 0%
775, 800, 800 ms respectively
1500, 1470 ms respectively
720 ms
43
0 0