Delay Input 1 (Configs 1, 4, 6, 7); Delay Input (Config 3) - Alesis GT Reference Manual

¥ Stereo Delay Each audio channel has its own individual delay
settings. The maximum delay depends on the chosen configuration:
Configurations 1, 2, 6
Configurations 3, 4
Configuration 7
¥ Ping-Pong Delay This delay bounces the delayed signal from left to
right audio outputs, with the speed determined by the delay time.
The maximum delay depends on the chosen configuration:
Configurations 1, 2, 6
Configurations 3, 4
Configuration 7
¥ Multi Tap Delay Available only in configuration 4, this offers up to 8
different taps along a delay line, with variable panning, volume,
delay time, and feedback. The total delay of all taps cannot exceed 1470
ms.
You might want to think of each individual tap as a mono delay line
(being fed from a common source) with its own delay time feedback
and volume parameters that can be panned anywhere in the stereo
field.

Delay Input 1 (configs 1, 4, 6, 7)

¥ Preamp Output The delay input signal comes from the preamp
output.
¥ EQ Output The delay input signal comes after the EQ module.

Delay Input (config 3)

¥ Preamp Output The delay input signal comes from the preamp
output.
¥ EQ Output
375, 400, 400 ms respectively
750, 705 ms respectively
320 ms
375, 400, 400 ms respectively
750, 705 ms respectively
320 ms
The delay input signal comes after the EQ module.
44