Editing Lezlie Eq Parameters (Config 2); High Rotor Level; Editing 11-Band Graphic Eq Parameters (Config 3); Eq Preset - Alesis GT Reference Manual

Audio-digital procesor
Hide thumbs Also See for GT:
Table of Contents

Advertisement

4.9 EDITING LEZLIE EQ PARAMETERS (config 2)

Configurations 2Õs EQ has one page that adjusts the timbre of the rotating
speaker sound.

High Rotor Level

The display says:
Rotating speakers generally have two different speaker drivers, one for
high, and one for low frequencies. This parameter adjusts the level of
the high frequency speaker from -20 dB lower than the low frequency
speaker to +06 dB higher. More positive numbers increase the overall
brightness of the sound.
4.10 EDITING 11-BAND GRAPHIC EQ PARAMETERS
(config 3)

EQ Preset

The display says:
This page allows you to access 6 preset tone curves, or to create your own
curve from scratch. The EQ parameters of the 6 preset curves have been
programmed to give you a variety of tones to choose from. To listen to
each tone curve, press the Up VALUE button which will scroll through
presets 1 through 6. If you find a preset you like, you can store it to the
current program by pressing the STORE button twice. To use a preset as a
starting point for your own custom tone curve, simply edit its EQ
parameters until you have the sound you want. Then press the STORE
button twice. This will store the edited tone curve as part of the program
that you are currently working on. The next time you call up that
HIGH ROTOR LEVEL
+ 0 0dB
EQ PRESET:
U SER
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quadraverb gt

Table of Contents