Midi Applications; Midi Functions; Midi Channel; Midi Thru - Alesis Wedge Reference Manual

MIDI A

MIDI Functions

The Wedge provides many MIDI functions, including being able to respond to
program changes, sending and receiving Program information via Sysex (System
Exclusive) dumps, and realtime control over effect parameters via MIDI controllers.
For more information about basic MIDI connections, see Chapter 2.

MIDI Channel

The MIDI Channel is used to receive program change messages, as well as other
MIDI messages for use with the realtime modulation capabilities in the Wedge.
To set the Wedge's MIDI channel:
Ê Press [UTIL].
The [UTIL] button will light.
Ë Continue pressing the [UTIL] button until page 2 is selected.
The display will look like this:
Ì Move the [B] slider to set the MIDI Channel from
mode (receives on all 16 channels simultaneously).

MIDI Thru

In order to pass on MIDI information from a control device thru the Wedge to
another MIDI device:
Ê Connect the control device's MIDI OUT to the Wedge's [MIDI IN]. Then connect
the Wedge's [MIDI OUT] to the MIDI IN of the other device you wish to control.
Press [UTIL] repeatedly until page 2 is selected.
Ë
Press the [D] button to turn MIDI Thru
Ì
Wedge Reference Manual
C 6
HAPTER
PPLICATIONS
.
On
MIDI Applications – Chapter 6
through , or for Omni
01 16 00
65