External Effects Hookup - Alesis GT Reference Manual

the program number by one with each footswitch press. You can set an
upper and lower program number limit, as described in section 5.7.

1.5 EXTERNAL EFFECTS HOOKUP

The QuadraVerb GT offers an effects loop where you can patch in effects
other than the ones included in the unit (you might want to insert, for
example, a wah-wah pedal or vintage fuzz). The effect can be bypassed or
enabled for each patch.
Patch the Effects Loop Send jack to the effect input, and the Effects Loop
Receive jack to the effect output. Also note that the Send jack provides a
post-analog effects, pre-digital effects send suitable for driving guitar
amps or a studio console; the Receive jack lets you plug directly into the
digital effects and bypass the analog effects. The effects loop can therefore
split the QuadraVerb GT into two separate effects, as described in section
2.1.
It is important to note that turning off the effects loop does not turn off
the effects send. Selecting In or Out on the Effects Loop page will only
enable or disable the Effects Loop Return jack. Also, the effects loop will
be bypassed if there are no jacks inserted, regardless of whether the
Effects Loop page is set to On or Off.
8