Related Manuals for Lyngdorf Audio SDA-2400
Summary of Contents for Lyngdorf Audio SDA-2400
- Page 1 LYNGDORF AUDIO SDA-2400 OWNER’S FORSIDE MANUAL Lyngdorf Audio SDA-2400 – Owner’s manual...
-
Page 2: Table Of Contents
WELCOME ................................. 3 COMPLIANCE ................................3 WHAT IS IN THE BOX ..............................4 FRONT PANEL ................................5 REAR PANEL ................................5 CONNECTION GUIDE ..............................6 CLEANING AND MAINTENANCE ..........................7 TECHNICAL ASSISTANCE ............................. 7 Lyngdorf Audio SDA-2400 – Owner’s manual... -
Page 3: Welcome
It’s a requirement. The SDA-2400 will deliver an audio experience that will far exceed your expectations. We thank you for placing your confidence in Lyngdorf. -
Page 4: What Is In The Box
What is in the box SDA-2400 Accessories Mains cord Trigger cable Owner’s manual Lyngdorf Audio SDA-2400 – Owner’s manual... -
Page 5: Front Panel
SDA-2400 is equipped with 3.5 mm mono mini jack sockets. • If there is a plug in the “Trigger In” socket with no voltage applied, the SDA-2400 is in standby mode. • If a DC voltage of 5-24V or a 50Hz AC voltage of 4-17Vrms is applied, the SDA-2400 will go into Operate mode. -
Page 6: Connection Guide
“Low Power” means that the SDA-2400 will turn on automatically when it detects a signal on the selected input. If a signal is not detected for around 30 minutes, the amplifier will go into standby mode. “On” will keep the SDA-2400 permanently turned on. When a trigger cable is used, the Power State must be “On”. -
Page 7: Cleaning And Maintenance
Cleaning and maintenance The SDA-2400 does not require any regular maintenance except to keep its exterior clean. Simply wipe it with a clean, soft cloth. A small amount of non-abrasive cleaner on the cloth can be used to remove any dirt or fingerprints. - Page 8 Lyngdorf Audio SDA-2400 – Owner’s manual...