Software And Computer Requirements; Install Software - Merck MilliSentials MISELLABST User Manual

Software and Computer
Requirements
Assigning a Host Computer
The computer that the MilliSentials™ Lab Labeling
System Software is installed on is referred to as the
host computer and should be used to install and connect
with the printer. After installation and connection with
the printer the host computer can be used to run the
software and print labels. A Windows
connect to the printer through a direct USB connection
or a network connection. A Mac
connect to the printer only through a direct USB
connection. Mobile devices can be used to facilitate
initial printer setup but cannot be host computers. Host
computers should have the minimum operating systems
described in the next section.
A Windows host computer is necessary to generate
®
an IP address for WiFi connection.
®
The MilliSentials™ Lab Labeling System Software does
not need to be installed on other devices in order to
print. Once connected to the printer, the host computer
can also facilitate communications with other devices
and computers in the lab through use of a network
connection and web browser. For this reason, a
computer that is already being used to run other lab
equipment is a suitable choice as a host computer. Be
sure this computer does not enter sleep mode.

Install Software

The MilliSentials™ Lab Labeling System comes with
a USB flash drive containing programs required to
communicate with the printer.
Setup Utilities Software
MilliSentials™
Lab Labeling System
Software
Windows Computer
®
Minimum Operating System Requirement:
• Microsoft Windows
®
version 1909 OS Build 18363.1016
1. Plug the MilliSentials™ USB flash drive
into the computer.
2. Wait for the drivers to load from the USB flash
drive device (this may take a few moments).
3. To install the Zebra
to the flash drive folder. Double click on the Zebra
Setup Utilities folder and double click on
zsu-1191289 .exe.
20508785w REV 12/20
host computer can
®
host computer can
®
10 OS,
®
Setup Utilities, navigate
®
4. A set-up wizard will help you. Click through the
setup wizard to install.
5. To install the MilliSentials™ Lab Labeling System
Software, navigate to and double click the
application called MilliSentials Lab Labeling
System Software Setup_Windows .exe.
6. Select "run". DO NOT extract the zip file,
extracting will prevent installation.
7. Follow the setup wizard instructions to install.
Note: If a security message pops up, click "run
anyway" or "add certificate". You may need to
contact IT administrator depending on your
institution's security settings.
8. Restart the computer. A light blue icon will appear
on your desktop.
Macintosh Computer (Mac
®
Minimum Operating System Requirement:
• Macintosh (Mac) macOS Catalina,
®
version 10.15.6.
Only the MilliSentials™ Lab Labeling System Software
is required.
1. Plug the MilliSentials™ USB flash drive into the host
computer.
2. Wait for the drivers to load from the USB flash drive
(this may take a few moments).
3. Navigate to the flash drive. Double click on the
folder MilliSentials Lab Labeling System Software.
For Mac , click and drag the zip folder called
®
MilliSentials Lab Labeling System Setup_Mac
onto the desktop. Double click on the folder and
the computer will open and install the program
automatically. A light blue icon will appear on your
desktop.
Note: The USB cable must be connected to the
printer to use this as a host computer.
Mobile Devices
Mobile devices include smart phones and tablets,
Android or iOS, with Google
installed. Users can facilitate network connection of the
printer using a mobile device, if desired. For this, the
mobile device version of Zebra
be installed on your device. Install the application called
"Printer Setup Utilities".
1. Go to Google Play
store, search "Printer Setup Utilities".
2. Click on Printer Setup
Utilities and download it.
Note: There is another app called "Zebra
Utilities". This is NOT the correct app and
will not work to setup your printer.
6 of 27
)
®
Chrome™ browser
®
Setup Utilities needs to
®
or Apple App
® ®
®
Printer Setup
Utilities App