Merck MilliSentials MISELLABST User Manual page 13

Note: If using an open network with no
password, simply click Next.
• For Wireless/Apply Settings, click Apply.
11. Click to restart the printer. This will take a few
minutes as the setup loads. When finished, the
status and network icons will be green and the IP
address displayed on the LCD screen.
Note: If the IP address is all zeros, the connection
was not successful. Repeat the process.
12. Close Printer Setup Utilities app on your Mobile
Device. Unpair the printer if desired.
After connection has been established,
you are ready to print labels.
Skip to MilliSentials™ Lab Labeling System
Software (p.14)
20508785w REV 12/20
Connecting User Devices
Using Network Kiosk
or Standalone Printer Modes
User devices separate from your host computer can be
used to print if they are connected to the same network
as the host computer. User devices can be Windows
computers, Mac computers, tablets, or smart phones.
®
Recommended browser versions:
Windows Google
®
Mac Google
®
Android Google
®
iOS Google
®
1. Set up your host computer as described in the
previous sections, using either hardwire (USB)
connection or a network connection.
2. Locate and write down the IPv4 Address of your host
computer:
Microsoft Windows
®
• Connect to a wireless network.
• Click on the network symbol in the bottom right-
hand corner of your desktop, select your network
name and click "properties." On the pop-up
window, scroll down to locate and copy the IPv4
Address.
Macintosh (Mac
®
host computer:
• Connect to a wireless network.
• Open Network Preferences. A pop-up window
will appear. The status described in the pop-up will
say "connected" under "status" and below there
will be a phrase that says, "WiFi
(your network name) and the IP address is (IPv4
address)." Copy the IP address.
3. From your user device, open the Google
browser and type the IP Address in the address bar
near the top of your browser.
4. Press enter and the MilliSentials™ Lab Labeling
System Software will load onto your screen.
5. Use the MilliSentials™ Lab Labeling System Software
to create and print lab labels. Saving templates will
save the file on the host computer (not your device).
Note: The host computer must be running the
MilliSentials Lab Labeling System Software. If your
host computer is turned off or goes to sleep, you
may not be able connect successfully.
13 of 27
Chrome 85.0.4183.102 or higher
® ®
Chrome 85.4183.102 or higher
® ®
Chrome 85.4183.101 or higher
® ®
Chrome 85.0.4183.92 or higher
® ®
10 OS host computer:
®
) iOS Catalina
®
is connected to
®
®
Chrome™
®