Merck MilliSentials MISELLABST User Manual page 20

Template Tab Features
Create New/Save Templates
1. The user must be logged in to create, save
or edit templates.
2. Create a label using Configure Label Line menu
options, including spreadsheet. A spreadsheet must
be imported before it can be used in labels.
3. After creating the lab label,
go to the Template Tab.
Name your template for
future use.
Note: the name of your
template is limited to
19 characters.
4. Click Save and press OK.
This will save all data used
in the label. After saving,
the data in Print Tab will
be cleared.
5. Access the template again
by selecting it on the My
Templates screen.
20508785w REV 12/20
Template Tab
20 of 27
My Templates
Templates you saved are available under the My
Templates icon in the bottom-right corner of your
screen. This menu is only available from your
specific profile.
Edits can be made to an existing template:
• To save edits in the template, click UPDATE from
the Template Tab. This will overwrite the current
template. You can only click UPDATE if edits have
been made to the label or the label name.
To start a blank template:
• Prior to entering data into your label, go to the
Template Tab and select Create New and press
OK, name the template for future use. Create New
is only available if you are logged in to a profile.
Note: Every time a new template is created,
data in the Print Tab is cleared.
Shared Templates
Any user, including unauthenticated (not logged in),
can access shared templates.
To share, toggle the Save to Shared Templates button
while saving a template.
The user who created the template can access this
template in either the My Templates or the Shared
Templates menus.