Chapter 4: Maintaining The Display; Turning The Display On Or Off - SMART Board GX Series Installation And Maintenance Manual

Chapter 4
Maintaining the display
Turning the display on or off
Cleaning and maintaining the display
Checking the display installation
Cleaning the screen
Cleaning the touch sensors
Maintaining ventilation
Preventing condensation
Replacing the pens
Removing and transporting the display
Updating system firmware
Applying a firmware update
Updating system firmware manually
With proper maintenance, the display will provide years of use.

Turning the display on or off

In most situations, you can put the display in Standby mode when not using it following the instructions in
SMART Board GX series interactive displays user guide (smarttech.com/kb/171745).
In some situations, such as when you transport the display or clean its screen, you need to turn the display
off. You can turn it back on after.
To turn the display off
1. Press the Power button
for the status light to stop blinking.
smarttech.com/kb/171744
on the front control panel or the remote control for five seconds and wait
53
54
54
55
55
56
56
56
57
58
58
58
53