Perkins 904J-E36TA Operation And Maintenance Manual page 122

122
Maintenance Section
Engine Oil and Filter - Change
Illustration 79
Typical example of an engine oil pan with a balancer
1. Place a suitable container below oil drain plug (1)
and oil drain plug (5).
2. Remove oil drain plug (1) and oil drain plug (5)
from engine oil pan (3) and allow the oil to drain
into the container for storage or disposal.
3. Remove drain plug seal (2) and drain plug seal (4).
Discard the seals.
4. Clean the oil drain plugs and install new drain plug
seal (2) and new drain plug seal (4). Install oil
drain plug (1) and oil drain plug (5) into oil pan (3).
M0092609-05
g06511911