g. ECCollectorWin
ECCollectorWin allows receiving wM-Bus packets to test the radio transmission.
You can start ECCollectorWin with the shortcut on your desktop or with the entry in the start
menu (FASTForward\EnergyCamWin\ ECCollectorWin).
When you press "AutoConnect" the software searches for connected EnergyCam devices that are
preconfigured as collector in the factory. Supported devices are:
-
wM-Bus USB stick from IMST GmbH (iM871A)
http://webshop.imst.de/radio-modules/usb-radio-products/im871a-usb-wireless-mbus-usb-adapter-868-
mhz.html
-
wM-Bus USB stick from Amber wireless GmbH (AMB8465-M)
https://www.amber-wireless.de/de/produkte/wireless-m-bus/alle-usb-sticks/wireless-m-bus-868-mhz-usb-
stick-int-antenne-amb8465-m.html
-
wM-Bus USB stick from Amber wireless GmbH (AMB8665-M)
https://www.amber-wireless.de/de/produkte/wireless-m-bus/alle-usb-sticks/868-mhz-wireless-m-bus-usb-
stick-ext-antenne-amb8665-m.html
FAST_EnergyCam_Manual.docx | v1.30 | 8. December 2016
page 31 / 38
Need help?
Do you have a question about the EnergyCam and is the answer not in the manual?