Table of Contents
Advertisement
Check readings
Once you have found the correct position, the green LED will light up and the meter reading will
be displayed. Compare reading with actual meter reading.
Please note: In case one of the three displayed meter readings is not correct or a red LED lights up,
you must start the positioning process from the beginning.
Fix EnergyCam to the meter
Once you have found the correct position, the green LED will light
up and the meter reading will be displayed. You can now fix the
device to the meter by pressing it gently. In the next few seconds
the EnergyCam will take more test images of the meter's counter.
Remove EnergyCam from the meter
To remove the device from the meter window, grab and rotate it.
Any remains of the adhesive pads can easily be removed by hand.
Warning: Using force to remove the EnergyCam can damage the
device's housing.
FAST_EnergyCam_Manual.docx | v1.30 | 8. December 2016
page 10 / 38
Advertisement
Table of Contents
Need help?
Do you have a question about the EnergyCam and is the answer not in the manual?