Table of Contents
Advertisement
Consistency Check:
Increment per hour:
OCR Installation:
Mode:
OCR Window:
FAST_EnergyCam_Manual.docx | v1.30 | 8. December 2016
Check the maximum increment per hour
the max increment per hour
This value is printed on the meter. The relevant value for Ferraris (Electricity)
meters is printed in brackets: 10(40)A -> (40A) – 28kWh
Typ
max Increment per hour
Oil
12l / 40l / 60l / 100l
Electricity
(8A) - 6 kWh / (16A) - 11 kWh / (32A) - 22 kWh /
(40A) - 28 kWh / (63A) - 44 kWh / (100) - 70 kWh
Gas
Q
Water
Q
200 m³
Counter
10 /100
Smart Installation Mode
ON (Default): the OCR algorithm detects:
- The number of digits.
- A decimal digit if present.
- The position on the meter.
OFF: If there isn't any red color to detect the decimal digit, the parameters listed
above can be configured.
Defines the area of the picture that is used to search for meter digits.
Disturbing characters on the meter are ignored.
The configuration
limits the analysis to the area between the orange lines.
= 6 m³ / 25 m³ / 40 m³ / 100 m³ / 160 m³ / 250 m³
max
= 1.5 m³ / 2.5 m³ / 6 m³ / 10 m³ / 100 m³ / 150 m³ /
n
page 23 / 38
Advertisement
Table of Contents
