Step 3:
Open the mounting bracket and fit the blue clip on the
meter window surface. Take care not to stick the
mounting bracket yet.
The blue clip needs to be positioned about 2-
3mm besides and on half height of the
outermost digit.
Please note: If your meter's readout is located in a
place that is difficult to reach, you can mount
EnergyCam 2.0 upside down.
Step 4:
Stick the mounting bracket on the meter window by
carefully pivoting it. Make sure the digits of the readout
are in between the two ends of the mounting bracket.
FAST_EnergyCam_Manual.docx | v1.30 | 8. December 2016
Fitting of blue clip
Positioning mounting bracket
Mounting upside down
Sticking mounting bracket on
meter
page 12 / 38