Table of Contents
Advertisement
Remove EnergyCam 2.0 from meter
To remove the device from the meter window, grab and
rotate it. Any remains of the adhesive pad can easily be
removed by hand.
Attention: Do not use force to remove EnergyCam 2.0 as
this can damage the device's housing or bracket.
Removing with a rotation
f. Errors
If the battery voltage is below the necessary level to start an action on the EnergyCam the display
shows "BAT LOW":
FAST_EnergyCam_Manual.docx | v1.30 | 8. December 2016
page 14 / 38
Advertisement
Table of Contents
Need help?
Do you have a question about the EnergyCam and is the answer not in the manual?