Installing The Control Panel; Panel Parts; Mounting The Control Panel In The Cabinet - Honeywell MAXPRO MPIP2000U Series Installation And Setup Manual

Installation and Setup Guide
3.3

Installing the Control Panel

3.3.1

Panel Parts

A B
D B
A Positioning pin (x 2) for stacked MPI module (optional).
B Mounting screw holes (x 4)
C Info card
D Positioning pin with screw hole (x 2) for stacked MPI module (optional).
3.3.2

Mounting the Control Panel in the Cabinet

Warning!
High voltage is present in the cabinet's built-in AC power adapter!
To mount the control panel in the cabinet, proceed as follows:
1. Position the control panel over the screw holes in the cabinet (I on
page 28) and click it into position.
32
Honeywell MAXPRO Intrusion MPIP2000U/3000U Series
C D
A
B
B
800-23044 Rev. A draft_11