Honeywell MAXPRO MPIP2000U Series Installation And Setup Manual page 34

Installation and Setup Guide
A
B
C D
# Item
A Batteries 1/2 +
B SHUTDOWN (button)
C 13.8 VDC
D Tamper
E BELL 1/2
F Zones 1–4
G Zones 5–8
34
Honeywell MAXPRO Intrusion MPIP2000U/3000U Series
U T S R
E F
Terminal
or Connect with
connector
+ terminal on backup battery 1/2
– – terminal on backup battery 1/2
Press the SHUTDOWN button for 5 seconds
to shut down the panel. For details, see
Shutting Down the Panel Securely on
page 122.
+ Input voltage: V+ terminal on cabinet's built-
in AC power adapter
– Input voltage: V– terminal on cabinet's built-
in AC power adapter
T-LID Cable from the cabinet's door tamper switch
+ + terminal on supervised bell 1/2
– – terminal on supervised bell 1/2
BELL 2 is only available on the MPIP3000 series.
For zones 1–4 (sensor contact inputs). For details, see
Wiring Inputs (Zones) on page 39.
For zones 5–8 (sensor contact inputs). For details, see
Wiring Inputs (Zones) on page 39.
Q P O N
G H I J
800-23044 Rev. A draft_11
M
L
K