Table of Contents
Advertisement
Operating instructions
System control and indicating equipment
The events of fire, fault and disablements are indicated at the control and indicating equipment installed in the
protected premises. The control and indicating equipment should be accessible to the person responsible for
the fire system.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Zones
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Fault
Power Fault
Panel healthy
15:45
System Fault
Vigilon Compact Voice Alarm System
Delay
GENT 2010
Designed to EN54 Pts 2, 4 & 16
Test
Disablement
Next
Previous
Voice Alarm Zones
1
2
3
4
6
7
8
9
All Zones
Clear Zones
Speak Now
VA Activated
MIC
Auxiliary messages
Emergency messages
1
TEST START
ALERT
TEST END
EVACUATE
2
STAND DOWN
BOMB
3
EN54 Part 2, 4 & 16
Vigilon
by Honeywell
COMPACT VOICE
The Audio loop is also routed through the protected premises and connects to each micro Distributed Amplifier
Unit and Mains Powered Distributed Amplifier Unit on the corresponding analogue loop circuit. Both ends of the
audio loop are terminated at the control panel. This loop is used to output the announcement of central audio
messages and live speech via local Emergency microphone and optional external Public Address (PA)
microphone. The loop can also carry background music for broadcast during normal condition.
Repeat panel
(provides system indications and controls)
A3 Zonal panel
A3 Mimic panel
6
Control panel
The control panel is the heart of the system. It is normally located near to
15
16
the main entry / exit point of the protected premises.
30
32
Fire
Verify
Sounder
CB253
CB254
Power
The control panel continuously monitors devices that are connected to its
analogue loop circuits. Each analogue loop cable is routed through the
protected premises to cover all areas. Both ends of each loop being
5
terminated at the control panel for system integrity. Fire sensing devices
10
installed on the analogue loop constantly monitor the environment for fire.
1
The alarm devices such as the micro Distributed Amplifier Units and
2
3
Mains Powered Interface Units via their speaker circuits provide alert and
evacuation voice alarm to warn occupants in the event of a fire.
Repeat indicator panel
(provides system indications)
Repeat panels
There may be one or more repeat panels installed in the
protected premises to provide secondary indications of the
system condition. The larger repeat panel additionally provide
system controls. The repeat panels are usually located near to
secondary entry and exit points of the protected premises.
Zonal Mimic panels
There may be a number of mimic and zonal panels installed in
the protected premises, to provide visual indications in a
graphical or zonal format. Normally one is installed next to the
main control panel. There may be additional panels installed in
other areas of the protected premises. The mimic panel or
zonal panel may be used to cover sub division of the
premises.
Hide quick links:
Advertisement
Table of Contents
