Honeywell MAXPRO Intrusion MPIP2000U/3000U Series
1
About this Document
1.1
Scope
This document provides full instructions for installing the hardware and for
initial programming of a MAXPRO Intrusion Control Panel and its associated
peripherals.
You can find the full programming information in the help file within the
MAXPRO Cloud configuration tool, and in the MAXPRO Cloud Configuration
Guide (doc. no. 800-24096).
This Installation and Setup Guide covers the following topics:
The installation of the MAXPRO Intrusion (MPI) hardware:
l
Cabinet for Control Panel or Remote Power Supply
o
MPI Control Panel
o
MPI peripherals: Keypads, Remote Power Supply, Door Control Module,
o
Relay Module, and Zone Expander.
LTE module
o
V-Plex devices.
o
Summary information for configuration in MAXPRO Cloud
l
Testing and commissioning, hand-over to the customer
l
Technical specifications of all MPI hardware
l
Agency information.
l
Caution!
For instructions on maintaining compliance with UL and ULC
standards, see Agency Statements on page 176.
This Installation and Setup Guide does not cover:
Full configuration instructions for MAXPRO Cloud. For details, see the
l
MAXPRO Cloud Configuration Guide (doc. no. 800-24096).
Cybersecurity of the MAXPRO Intrusion installation. For details, see the
l
MAXPRO Intrusion Security Manual (doc. no. 800-25507).
The daily usage of the MAXPRO Intrusion system. For details, see the
l
MAXPRO Intrusion User Guide (doc. no. 800-23041).
800-23044 Rev. A draft_11
Installation and Setup Guide
11