Operate Garage Door From Lynx Touch Control Panel - Honeywell LYNX Touch L5210 Series Manual

Garage Door Operation Screen

Operate Garage Door from LYNX Touch Control Panel

• When the garage door is open, "Ready to Arm – Fault" is displayed in a yellow band at the top of the display.
Notes:
• If a "Close in" or "Close at" time has been programmed, the garage door will always operate as programmed until the
selection has been cleared.
Step
1. At the Garage Door operation screen, select the Opened or Closed Garage Door icon to Close or Open the door.
2. When the door position has changed the icon will switch from Opened to Closed, as applicable, and CLOSED or
OPENED is displayed
Button or Icon
Edit Used to modify description of Garage Door
Close in Provides access to keypad used to set a specific period of
time (up to 12 hours and 59 minutes) before an open garage
door closes automatically. If programmed the time will also be
displayed.
Close at Provides access to keypad used to set a specific time that an
open garage door closes automatically. If programmed the
time will also be displayed.
Back Used to return the control to the Garage Door list.
Indicates Garage Door is Closed. Select to Open Garage
Press to open
Door.
Indicates Garage Door is Open. Select to Close Garage
Press to close
Door.
Action
- 19 -
Home Automation
Garage Door Opener Operation
Function