Non-"Ex I" I/O Connections - KROHNE OPTISONIC 8300 Supplementary Instructions Manual

OPTISONIC 8300

4.4 Non-"Ex i" I/O connections

The following non-intrinsically safe I/O (inputs/outputs) are available:
I/O PCB
Basic I/O
Modular I/O
Modular carrier with 1 or 2 I/O modules
Profibus DP I/O
Fieldbus I/O
RS 485 Modbus
The options separated by "/" are software selectable (can be changed by the user)
The options separated by "or" are hardware versions (must be ordered as such)
All outputs are passive unless otherwise indicated
HighC means High Current input/output, Namur means that the in-/outputs are according to the NAMUR
NE43 standard
03/2020 - 4008065001 - AD EX OPTISONIC 8300 R03
ELECTRICAL CONNECTIONS
Input/output functions,
U < 32 V DC, I
n
Current Output, active or passive, with HART
Status Output / Control Input
Status Output
Pulse / Status Output
Current Output, active or passive, with HART
Pulse / Status Output, active or passive, highC or
Namur
Each module: 1 out of following 3 in-/output
functions:
Current Output, active or passive
Pulse / Status Output, active or passive, highC or
Namur
Control Input, active or passive, highC or Namur
Profibus-DP, active
Profibus-PA or Foundation Fieldbus
Modbus with or without termination
www.krohne.com
< 100 mA, U = 253 V
n m
4
23