Attention!
To help reduce the risk of the unit tipping over, the Tipover Restraint
these instructions exactly!
Place unit at desired location.
3/8"
Drill a
hole in wall
at the appropriate location.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole at top
of unit with Wood Screw.
Use Tipover Restraint to secure Bracket
on unit to Bracket on wall.
(See Figure X)
Put tie end of Tipover Restraint into loop end
of Tipover Restraint and pull until tight.
Drill 3/8" hole in wall
Hardware List
Anchor
1 pc.(+1 extra)
Bracket
2 pcs.(+1 extra)
Assembly Instructions 6/6
Anchor in wall
3/8" wall hole
tie end
Bracket at
top of unit
loop end
Tipover
Restraint
M3.5x40
Tipover Restraint
Wall Screw
1 pc.(+1 extra)
1 pc.(+1 extra)
must
be installed following
Wall Screw
Bracket
on wall
Wood Screw
Figure X
Top of unit
M3.5x13
Wood Screw
1 pc.(+1 extra)