Page 1
M6x30 8 Pcs.(+1 extra) Head Cap Bolt (long) Head Cap Bolt (short) Small Hex Wrench 8 Pcs.(+1 extra) 3 Pcs.(+1 extra) 1 Pc. Tools required for assembly : Phillips screwdriver, Level Home Styles Consumer Assistance : www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 2
Assembly Instructions 2/6 IMPORTANT * Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Do not tighten up all the bolts until each part is properly assembled. * Use a soft cloth between these parts and the floor.
Page 4
Assembly Instructions 4/6 Wood Screw Hook STEP 1 Attach Hooks with Wood Screws into the pre-drilled holes in Back Frame (J). Figure 1 (See Figure 1) STEP 2 Assemble Back Frames (J), (K), (L) and (M). Head Cap Bolt (short) STEP 3 Attach Side Panels (H) and (I) to unit with Head Cap Bolts (short).
Page 5
Assembly Instructions 5/6 Head Cap Bolt (short) Head Cap Bolt (short) STEP 4 Attach Top (G) to unit with Head Cap Bolts (short). Attach Arms (N) and (O) to unit With Head Cap Bolts (short). STEP 5 Attach Top Unit to Base Unit with Head Cap Bolts (short).
Assembly Instructions 6/6 Attention! To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly! Anchor in wall Wall Screw Bracket 3/8” wall hole on wall Wood Screw Place unit at desired location. 3/8”...