Download Print this page
Home Styles 88 4512 95 Manual

Home Styles 88 4512 95 Manual

Kitchen cart

Advertisement

Quick Links

IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
E.
F.
Back Panel
Back Upright
3 pcs.
2 pcs.
N.
K.
Side Rack
Arm
1 pc.
2 pcs.
L.
M.
Towel Bar
Side Rack
1 pc.
1 pc.
Hardware List
Hex Wrench
1 pc.
Caster
2 Locking
Small
2 Non-Locking
Hex Wrench
4 pcs.
1 pc.
Tool(s) required for assembly: Phillips screwdriver
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
88 4512 95
Kitchen Cart
Side Panel
G.
Back Stretcher
1 pc.
H.
Back Stretcher
1 pc.
P.
Rack
1 pc.
O.
Base Rack
1 pc.
M6x38
Magnet
Head Cap Bolt (long)
2 pcs.
4 pcs. (+1 extra)
M3x16
M6x25
Wood Screw
Head Cap Bolt
for Magnet
4 pcs. (+1 extra)
4 pcs. (+1 extra)
B.
1 pc.
I.
Front Piece
2 pcs.
Q.
Door
1 pc.
S.
Shelf
2 pcs.
M3.5x16
Wood Screw (short)
24 pcs. (+1 extra)
M6x12
Head Cap Bolt
for Caster
16 pcs. (+1 extra)
888-680-7460, 877-831-0319
C.
D.
Side Panel
Middle Panel
1 pc.
1 pc.
J.
Base
1 pc.
R.
Door
1 pc.
T.
Drawer
3 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
M3.5x25
Wood Screw (long)
24 pcs.(+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
Drawer
Pull Handle
5 pcs.
M4x25
Machine Screw
5 pcs.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 88 4512 95 and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Styles 88 4512 95

  • Page 1 2 Non-Locking Hex Wrench 16 pcs. (+1 extra) 8 pcs. (+1 extra) 4 pcs. (+1 extra) 5 pcs. 4 pcs. (+1 extra) 4 pcs. 1 pc. Tool(s) required for assembly: Phillips screwdriver Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
  • Page 2 Assembly Instructions 2/6 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the bolts until each part is properly assembled. Ÿ Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
  • Page 3 Assembly Instructions 3/6 Figure 4 Figure 5 STEP 3 Attach Back Stretcher (G) to Side Panel (B), then flip the locks. (See Figures 4 and 5) Attach Back Uprights (F) to unit, then slide Back Panels (E) into position. Attach Back Stretcher (H) and Side Panel (C) to unit, then flip the locks. Figure 6 Head Cap Bolt for Caster Non-Locking Caster...
  • Page 4 Assembly Instructions 4/6 Head Cap Bolt (long) ‘Arrow’ sticker at front STEP 5 Attach unit from Step 4 to unit from Step 3 with Head Cap Bolts (long), then flip the locks. Wood Screw (short) STEP 6 Turn the unit to its’ upright position. Slide Towel Bar (L) into place.
  • Page 5 Assembly Instructions 5/6 Drawer (T) Bottom STEP 7 Attach Drawer Front (T1) and Drawer Back (T2) to Drawer Side (T3) with Wood Screws (long). Attach Drawer Side (T4) to unit with Wood Screws (long). Roller at back Wood Screw (long) STEP 8 Wood Screw (short) Slide Drawer Bottom (T5) into the grooves...
  • Page 6 Assembly Instructions 6/6 Adjustable Pin STEP 10 Insert Adjustable Pins into side panel and middle panel at desired level. Figure 7 Place Shelves (S) into position. Attach Doors (Q) and (R) by sliding door lift hinges into side panel lift hinges. (See Figure 7) Assemble Pull Handles to Doors with Machine Screws.
  • Page 7 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.