Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 pc.
F.
Back Stretcher
1 pc.
G.
Back Stretcher
1 pc.
H.
Front Stretcher
1 pc.
I.
Fixed Shelf
1 pc.
J.
K.
Shelf
Shelf
1 pc.
2 pcs.
Hardware List
Cam Lock
18 pcs. (+2 extra)
Cam Lock Screw
18 pcs. (+1 extra)
Tool(s) required for assembly: Phillips screwdriver, Drill (8 volts or less), 3/8" Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
88 5100 302
Hutch
B.
Side Panel
1 pc.
L.
Middle Panel
1 pc.
M3.5x16
Wood Screw
for Back Panel
12 pcs. (+1 extra)
M4x13
Wood Screw
for Steel Plate Connector
8 pcs. (+1 extra)
Hutch Unit
D.
C.
Back Panel
Side Panel
3 pcs.
1 pc.
N.
M.
Door
Middle Panel
1 pc.
1 pc.
Adjustable Pin
12 pcs. (+1 extra)
M4x25
Machine Screw
2 pcs.
888-680-7460, 877-831-0319
E.
Back Upright
2 pcs.
O.
Door
1 pc.
Knob
2 pcs.
Steel Plate Connector
2 pcs.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Home Styles 88 5100 302
Summary of Contents for Home Styles 88 5100 302
- Page 1 Steel Plate Connector Cam Lock Screw 2 pcs. 2 pcs. 18 pcs. (+1 extra) 8 pcs. (+1 extra) Tool(s) required for assembly: Phillips screwdriver, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/6 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Do not tighten all the screws until each part is properly assembled. Cam Lock Screw Cam Lock Screw STEP 1 Insert Cam Lock Screws into pre-drilled holes of...
- Page 3 Assembly Instructions 3/6 STEP 3 Attach Fixed Shelf (I) to unit with Cam Locks. Cam Lock Cam Lock STEP 4 Attach Middle Panels (L) and (M) to unit with Cam Locks. Attach Front Stretcher (H) to unit with Cam Lock. Cam Lock Cam Lock STEP 5...
- Page 4 Assembly Instructions 4/6 Adjustable Pin STEP 6 Insert Adjustable Pins into side panels at desired level. Place Shelves (J) and (K) into position. Attach Doors (N) and (O) to unit by sliding door lift hinges into side panel lift hinges. (See Figure 3) Attach Knobs to Doors (N) and (O) with Machine Screws.
- Page 5 Assembly Instructions 5/6 STEP 8 Insert Wood Screws for Back Panel into pre-drilled holes of unit. Wood Screw for Back Panel Wood Screw for Steel Plate Connector Figure 5 Steel Plate Connector STEP 9 Attach Hutch to Buffet with Steel Plate Connectors by inserting Wood Screws for Steel Plate Connector into pre-drilled holes.
-
Page 6: Hardware List
Assembly Instructions 6/6 IMPORTANT Ÿ To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly. STEP 10 Pre-drilled hole Anchor in wall Wall Screw Bracket at top of unit on wall Place unit at desired location. - Page 7 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 88 5100 302 and is the answer not in the manual?
Questions and answers