Advertisement
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cross Dowels
into the holes in Front
Panel (D) and
Back Panel (E).
Attach Side Panels (B)
and (C) to Front Panel
(D) and Back Panel (E)
with Head Cap Bolts
(long). (See Figure 1)
Figure 2
STEP 3
Attach Seat (A) to unit with Head Cap Bolts (short).
Put Base (F) into place.
Cover all holes with Wood Plugs.
(See Figure 4)
Figure 4
Head Cap Bolt (long)
B
B
A
Figure 3
Assembly Instructions 2/6
Cross Dowel
STEP 2
Attach Spring Supports to Seat (A) with
Wood Screws into the pre-drilled holes.
(See Figures 2 and 3)
Head Cap Bolt
(short)
B
D
B
E
B
A
B
F
Wood Plug
Figure 1
C
Advertisement
