Installation Manual
MMI- 20032352
3
Mounting
3.1
Mount the HPC010 sensor
Use your common practices to minimize torque and bending load on process connections.
Tip
To reduce the risk of condensation problems, do not orient transmitters or sensor junction
boxes with their conduit openings pointing upward.
NOTICE
Lifting the sensor by the electronics or rupture disk can damage the device.
Figure 3-1: Mounting the HPC010 sensor
A. Optional: Use the sensor grooves for mounting the sensor.
Notes
•
Do not use the sensor to support the piping.
•
The sensor does not require external supports. The flanges will support the sensor in
any orientation.
Installation Manual
Mounting
March 2020
11