Technical Data; Ordering - Danfoss IPS 8 User Manual

User Guide | Intelligent Purging System (IPS 8) for Ammonia - Technical data, installation and use

Technical data

Ordering

4 | BC344024774466en-000201
Supply voltage
Voltage range for field ) connected solenoid coils:
1
Maximum Current Rating of Overcurrent Protection (MOP)
Minimum Circuit Ampacity (MCA)
Power consumption
Short-circuit current rating
Temperature range ambient
Temperature range transport/storage
Enclosure - Electrical panel
Weight
Dimensions (LxWxH)
Purger refrigerant
Max. operating pressure (PS) R452A
System refrigerant
Max. operating pressure R717
Operating temperature R717
) Field connected coils on Digital Output:
1
Description Field connected valves
Q6, COM6, OUT6 YV ICFD Valve
Q7, COM7, OUT7 Y1 Valve
Q8, COM8, OUT8 Y2 Valve
Q9, COM9, OUT9 Y3 Valve
Q10, COM10, OUT10 Y4 Valve
Unit
Danfoss Intelligent Purging System IPS 8 60Hz unit
Accessories/Spare parts
Flange blind blank incl Bolts, nuts and Gaskets*
SV3 Float Valve
ICF 15-4 solenoid, DIN Butt weld 15mm ½ inch
ICF 15-4 solenoid, ANSI Socket weld 15mm ½ inch
ICF 15-4 solenoid, ANSI Butt weld 15mm ½ inch
Welding Flange incl Bolts, nuts and Gaskets
Purger solenoid kit (Armature, tube, Sealing, Orifice, Filter insert)
Solenoid coil, 24V DC
Coil 93 – 121 V AC, 60 Hz, 16 W/29 VA - for field purge solenoid valves
Coil 110 – 120 V AC, 60 Hz, 16 W - for field purge solenoid valves
Coil 110 – 120 V AC, 60 Hz, 16 W - for field purge solenoid valves
PSU, 24V DC - optional for powering purge points
Restrictor, purge line
UL compressor Cranck case heater
UL condenser coil assy incl screws
UL fan motor for condenser Incl fan grid and screws
UL extraction Fan
UL Air grid with filter (1 piece)
Pre-programmed MCX 15
Pressure transmitter evaporator, soldered (AKS 32R)
Compressor including Start relay box and Start and Run Capacitor
Compressor Hi-temp sensor
Expansion valve, R452A
Sight glass
Pressure transmitter - R717, Threaded, AKS2050
Thermostat for crankcase heater control
Temperature sensor - R717, AKS 21M
Pressure switch for Fan
Pressure safety switch
* For closing system flange during system pressure testing
Note:
All Spare part items are parts already built-in to
the IPS 8.
(084H5061, Welding Flange incl Bolts, nuts and
Gaskets are included with IPS 8, not built-in).
230 V +/-10% AC, 1ph, 60Hz
115 V +/- 10% AC 60Hz
15A
6,85A
max. 1.25 kW
SCCR 18kA
-10 °C – 43 °C (14 °F – 109 °F)
-30 °C to +60 °C (-22 °F to 140 °F)
Type 12
max. 125 kg (276 lbs)
1051 x 441 x 703 mm (41.4 x 17.4 x 27.7 inches)
R452A 900 gram (31.7 oz)
28 bar (406 psi)
R717
40 bar (580 psi)
-40 °C to +60 °C (-40 °F to 140 °F)
Description Field connected valves
Q11, COM11, OUT11 Y5 Valve
Q12, COM12, OUT12 Y6 Valve
Q13, COM13, OUT13 Y7 Valve
Q14, COM14, OUT14 Y8 Valve
Accessory Spare part
x
x
x
x
x
x
x
x x
x
x
x
x x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Accessory parts may possible be used at
installation along with the IPS 8.
© Danfoss | DCS (ms) | 2021.03
Code number
084H5003
Code
084H5053
027B2023
027L4543
027L4538
027L4602
084H5061
084H5051
018F6968
018F6813
018F4112
018F4113
080Z0055
084H5054
084H5065
084H5066
084H5060
084H5062
084H5063
084H5052
060G3552
104L2897
084N2003
068U3881
014-0191
060G5750
060L111166
084N2003
Contact Danfoss
Contact Danfoss