Installation; Unpacking Procedures; Transportation Procedures - Mitsubishi Electric Melfa CR800-05VD Instruction Manual

Industrial robot
Hide thumbs Also See for Melfa CR800-05VD:
Table of Contents

Advertisement

2.2 Installation

2.2.1 Unpacking procedures

The controller is shipped from the factory packaged in cardboard.Open the cardboard package and take out the
controller.
CAUTION

2.2.2 Transportation procedures

This section explains how to transport the controller and the safety extension unit.
Controller
Mass: Approx. 12.5kg
Fig. 2-1 : Transporting controller
1) Slightly tilt the controller and put your hands underneath. Providing steady support with both hands, lift it up
and transport.
Be careful not to trap fingers when transporting the controller.
Slowly pull the controller box straight up. Be careful not to let the controller slip out of
the box.
2Unpacking to installation
Safety extension unit
Mass: Approx. 0.8kg
Installation 2-4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr800-05vd

Table of Contents