SRW-1000 ASSEMBLY FROM SHIPPING CONFIGURATION
NOTE: Using the SRW-1000 Parts Manual will be helpful as reference throughout this procedure. Items shown
in blue are the focus of each step.
1. Remove the following items from their shipping location and set aside:
•
Light Mount Bars and Mounting Plates (Left and Right)
•
Rubber Flap Assembly
•
Guard Rods (Left and Right)
•
Driveline
2. Attach lifting device to both the drum and the Drum Carriage to keep the drum from falling when removing
shipping brackets.
SRW1000 08/17
© 2017 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-2