Table of Contents
Advertisement
12. Check the position of the axle mount plates. If the wheels are inside the frame, SHIPPING POSITION
shown below, loosen the bolts and re-install with the wheels to the outside of the frame, OPERATING
POSITION shown below. The center of the lower 5/8" mounting bolts must be set to a maximum 2-1/4"
from the bottom of the pivoting wheel standard legs as shown below. A setting higher than 2-1/4" may
result in the tires contacting the drum. Also see "Operating the Windrower" in the Operation Section of this
manual.
SRW1000 08/17
© 2017 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-7
Advertisement
Table of Contents
