Schulte SRW1000 Operator's Manual page 30

Pivoting rock windrower
Table of Contents

Advertisement

INTRODUCTION
Your SRW1000 is designed to windrow small to medium surface rocks, roots, stumps,
and other debris in the fields. The SRW1000 windrower can also be used for reclaiming
gravel from road sides. Check local regulations before operating on road ways. With
proper maintenance as described in this manual, your SRW1000 windrower will provide
you with years of dependable service with a minimum of repairs.
It is required that all operators of this implement read this manual or be instructed of its
contents as to safety, proper operation, and maintenance before beginning operation.
Your windrower has been assembled for operation with a tractor PTO input speed of 540
RPM.
When ordering replacement parts for the Gearboxes and the Drivelines, be sure to specify the serial number.
The serial number is located on the left hand side attached to the SRW1000 hitch pole.
Driveline Integral Shields, and Gearbox Shields are standard equipment and are to be used at all times.
To place the warranty into effect, fill out the warranty card in full, giving all the requested information, and mail
promptly. Be sure to give the serial number of the SRW1000.
SRW1000 08/17
Introduction Section 2-2
© 2017 Alamo Group Inc.

Advertisement

Table of Contents
loading

Table of Contents