Table of Contents
Advertisement
Light Kit
Installation of Left Light Bar
1 . The left light bar (R900-116) is the shorter of
the two.
2 . Locate the light bar on the back of the machine
with the arm pointing to the outside of the
machine.
3 . Place a backing plate (R900-118) on opposite
side of tube (inside of machine) from light bar.
Position the light bar and backing plate as close
to the outside of the machine as possible.
4 . Insert the 1/2" x 3-1/4" bolts provided through
backing plate and light bar. Secure with 1/2"
locknuts provided.
Installation of the Right Light Bar
1. Locate the light bar (R900-117) is the longer of
the two.
2. Place the light bar on the back of the machine
wi.th the arm pointing to th outside of the
machine.
3. Place a backing plate (R900-118) on opposite
side of tube (inside of machine) from light bar.
Position the light bar and backing plate as close
to the outside of the machine as possible.
4. Insert the 1/2" x 3-1/4" bolts provided through
backing plate and light bar. Secure with 1/2"
locknuts provided.
Installation of Lights
Install the lights onto the light bars using 5/16" hardware provided. Ensure that the red lights are inside and
facing to the rear.
SRW1000 08/17
© 2017 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-11
Advertisement
Table of Contents
