Appendix B.9 Create And Manage Individual Users; Figure 39: Fs-Gui User Management - SMC Networks Lochinvar ProtoNode Startup Manual

Appendix B.9 Create and Manage Individual Users

•
Type the IP Address of the ProtoCessor into the web browser or use the FieldServer Toolbox to
connect to the ProtoCessor, then login to the FieldServer.
•
Click on the Diagnostics tab at the top of the screen, then click on View in the navigation panel,
and then on Connections.
•
Click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
•
Check that the Users tab is selected.
User Types:
Admin – Can modify and view any settings on the FieldServer.
Operator – Can only make changes to the writable device points on the FieldServer.
Viewer – Can only view settings/readings on the FieldServer.

Figure 39: FS-GUI User Management

Page 42 of 56
Lochinvar ProtoNode Start-up Guide