Erasing A Programmable One-Touch Key; Printing A List Of Your Programmable One-Touch Keys - Muratec MFX-2500 Operating Instructions Manual

Beyond the Basics
9
Use the numeric keypad to enter the appro-
priate - password for the box.
ITU T
Note: If there isn't a
ITU
box, skip to step 10.
10
Press [Enter].
11
If you want the F-Code polling to begin imme-
diately every time you press the key, press [Exit] and skip to step 14.
If you want to delay the F-Code polling, select "Delayed Tx" and press
[Enter].
12
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a
certain time on a certain day of
the month. (For example, "Do
this at 5:05
To select this option, use the
numeric keypad to enter the
date and time when the fax
should perform the command.
Option 2: Perform the command at a cer-
tain time each day you press the
key. (For example, "Do this at
5:05 today.")
PM
To select this option, use the
numeric keypad to enter 0, 0
and then the time the fax should
perform the command.
13
Press [Enter], [Exit].
14
The machine will return to step 2.
Note: When the F-Code transmission is programmed, the
appeared in the programmable one-touch number list on the
Note: When the delayed transmission is programmed, the
appeared in the programmable one-touch number list on the
If you want to enter or change another key's programming, repeat steps 2-14.
If you do not want to enter or change any other key's programming, press
. Your machine returns to standby mode.
RESET
2.42
- password for this
T
on the 30th.")
PM

Erasing a programmable one-touch key

1
Press
MENU
The
LCD
2
Select the programmable one-touch key which you want to erase.
Note: You can select the programmable one-touch key by pressing that key
Note: You can press [Detail] to see the number which has been pro-
3
Press [Erase]. The
Important: If you want to quit without
4
Press [Erase] to erase the programmable
one-touch number.
To erase another programmable one-touch number, repeat steps 2–4.
Or press
RESET

Printing a list of your programmable one-touch keys

You fax machine can print a list of the commands you've stored in your programma-
ble one-touch keys.
The list includes:
(1) each key's one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you've selected
(5) if applicable, the selected call group(s) or F-Code box(es) you've stored in
the key
(6) the individual settings for each key
symbol is
.
LCD
To print a list of programmable one-touch keys, press
symbol is
.
LCD
, , [Enter].
C
shows the programmable one-touch number list.
on the control panel.
grammed in that key.
shows:
LCD
erasing the one-touch number
you've selected, press [Cancel].
The fax will return to step 2.
to return to standby mode.
, , [List].
MENU C