Muratec MFX-2500 Operating Instructions Manual page 86

Trouble Shooting
What you see on the
LCD
Commands full
Communication Error
Document full
Document is in the ADF
Document stored
Enter number (0-32)
4.2
What it means/What to do
Your fax machine has all of its 100 possible
delayed commands (automatic redialling counts
as one) stored in memory and cannot accept
another. Delete an existing command by using
, or wait until your fax has
REVIEW COMMANDS
completed one of the delayed commands.
A communication error disrupted the transmis-
sion or reception. If you were transmitting, press
to clear the error message and then retry
STOP
the transmission. If you were receiving a fax, try
to contact the other person and have them retry
the transmission. (The problem may be entirely
with their machine, phone line, etc.)
You tried to enter an document into Batch box
or an F-Code box, but the machine has reached
its capacity. Delete documents stored in boxes
until the machine will let you proceed.
The command you're trying to enter requires the
use of the , which is already in use. Wait for
ADF
the machine to stop using the , then try
ADF
again.
You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
. . . or . . .
You tried to store the polling document in your
fax machine, where one already had been
stored. Wait for the fax to complete the regular
polling operation, then try again.
. . . or . . .
A received document was in your fax's memory
when you tried to turn off the security reception
passcode. Print the received document from your
fax's memory, then retry the desired operation.
You tried to enter a call group number greater
than 32. Your machine can maintain 32 call
groups, numbered 1-32 (call group 0 covers all
the groups). Determine the correct call group
identifier number and enter it, instead.
What you see on the
LCD
Hang Up Phone
Invalid I.D. code
Invalid Number
Invalid protect passcode
No command stored
No Document Stored
No protect passcode
No report
Not stored
Not store in Relay box
What it means/What to do
The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the "hook" button.
The F-Code box . . code you entered isn't valid.
I D
Try re-entering your F-Code box . . code.
I D
You entered the incorrect number which has no
function during the current operation.
The protection passcode you entered isn't valid.
Repeat the operation, entering the correct protec-
tion passcode.
You pressed to review
REVIEW COMMANDS
upcoming commands, but your fax machine had
none stored.
You tried to print a document from memory, but
your fax machine had none stored.
You tried to protect an operation or department
code but there's no protection passcode stored in
your fax machine. Store a protection passcode in
your machine, then retry protecting the operation
or department code.
You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
You selected an autodialer, batch box or F-Code
box number for which there is no phone number
programmed. Either choose another number or
dial a phone number directly from the numeric
keypad.
. . . or . . .
You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.