Easydial Directory Dialing - Muratec MFX-2500 Operating Instructions Manual

Beyond the Basics
EasyDial directory dialling
EasyDial directory dialling makes your autodialer even more like an electronic
phone book. EasyDial sorts and displays numbers alphabetically according to their
Location s, so you can find them and dial them easily.
ID
To dial using EasyDial:
1
For a fax call: Place the document and select resolution and contrast you
require.
For a regular phone call: Lift up the optional handset.
Make sure there's no document on the ADF and FBS glass, then skip to step 3.
2
If you want to toggle between transmission from memory and transmission
from the feeder, press
MEMORY TRANSMIT
3
Press /
SPEED DIAL TEL INDEX
The shows the listing in your fax
LCD
machine's EasyDial directory.
The EasyDial directory sorts entries alpha-
betically in the following order:
(1) by alphabet
(2) by number
(3) by symbol.
4
Scroll through the listings to find the one you want by using the cursor key.
Note: To quickly search, press capital letter of Location
key.
5
When the shows the name (Location
LCD
• If there is a document on the ADF or FBS glass, your machine will dial a
fax call.
• If you have lift up optional handset, your machine will dial a regular
phone call.
2.8
.
twice.
. . using one-touch
I D
) you want to dial, press
ID
If an EasyDial call fails
If an EasyDial call fails, what happens next depends upon the kind of call it was.
If it was a fax call ...
... Your fax machine automatically redials the number according to the redial inter-
val you've set (see page 3.6). It keeps trying until either of the following occurs:
• It successfully reaches the other number
• It has attempted the number of redials programmed and has still not connected
(see "Changing redial settings," page 3.6).
If it was a regular phone call ...
... You'll have to redial manually:
1
Obtain a dial tone by either lifting the handset or pressing
2
Press
REDIAL
Note: If the call fails and you used
hang up. Or if you've pressed
end it.
.
START
/ .
PAUSE
/ to dial, press
MONITOR CALL
to begin the transmission, press
START
/ .
MONITOR CALL
/ to
MONITOR CALL
to
STOP