Hoist Motor Brake And Load-Limiting Device; Slip Clutch Adjustment - R&M LM Installation And Maintenance Manual

LM10 I&M MANUAL/EN/11.30.2010
7.3

Hoist Motor Brake and Load-Limiting Device

The hoisting motor is equipped with a D.C. electromagnetic disc brake. The brake brings the load to a
smooth and quick stop and holds the load when the motor is not energized. An energized coil releases the
hoist brake to allow the hoisting motor to run freely when in use.
The load-limiting device is a slip clutch and it is integrated into the design of the hoist motor brake. Even if
the clutch slips, once power is removed, the brake will engage to stop and hold the load.
7.4

Slip Clutch Adjustment

Figure 10. Slip Clutch Adjustment
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
24/85