Lubrication - R&M LM Installation And Maintenance Manual

LM10 I&M MANUAL/EN/11.30.2010
8.2

Lubrication

Table 6. Lubrication Specifications
LUBRICATION
POINT
Chain Oil or Liquid grease
Idler sprocket Grease (without MoS2)
Slide bearing + KP 2 (DIN 51 502)
bearing
Soap-based lithium
Approx. drip point
Worked penetration
Operating temperature - 4°F - +266° F
Gears KP 0 K grease (DIN 51502)
Soap-based lithium + MoS 2
Approx. drip point + 180° C
Worked penetration 355 - 385° C
Operating temperature -30°C to + 130° C
Open Wheel Gearing: EP1 Mobilux or equivalent.
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
SPECIFICATIONS
+ 500° F
509-563° F
ACCEPTABLE LUBRICANTS
Chain lubricating fluid (Ceplattyn
or similar) EP-90
BP: BP Energrease LS - EP 2
Esso: Unirex N2
Mobil: Mobilgrease HP
Shell: Shell Alvanio EP Grease 2
Mobil: Mobilgrease special
BP: Multi-purpose grease L 21 M
Shell: Shell Retimax AM
Texaco: Molytex grease EP 2
QUANTITY
As required
As required
0.05 liter
61/85