R&M LM Installation And Maintenance Manual page 42

LM10 I&M MANUAL/EN/11.30.2010
208 / 230 VOLT (SEE 208/230 VOLT SINGLE SPEED CONTROL LAYOUT & WIRING DIAGRAM)
1. Connect motor brake lead (-) to terminal strip X1 terminal 14. Connect (+) to K21 terminal 4.
2. Motor Leads:
a. T1 & T7 connect to main line contactor K10 terminal 1.
b. T2 & T8 connect to DOWN contactor K22 terminal 2.
c. T3 & T9 connect to DOWN contactor K22 terminal 6.
d. T4 connect to terminal strip X1 terminal 11.
e. T5 connect to terminal strip X1 terminal 12.
f. T6 connect to terminal strip X1 terminal 13.
g. Jumper wires on terminal strip X1 to connect terminals 11, 12, and 13.
3. Control transformer connections:
a. Jumper connections terminals 230 to 230 and terminals 01 to 02. See control panel layouts and
wiring diagrams.
460 VOLT (REFER TO 460 VOLT SINGLE SPEED WIRING DIAGRAM)
1. Connect motor brake lead (-) to contactor K21 terminal 2.
2. Motor leads:
a. T1 connect to main line contactor K10 terminal 1.
b. T2 connect to DOWN contactor K22 terminal 2.
c. T3 connect to DOWN contactor K22 terminal 6.
d. T4 & T7 connect to terminal strip X1 terminal 11.
e. T5 & T8 connect to terminal strip X1 terminal 12.
f. T6 & T9 connect to terminal strip X1 terminal 13.
3. Control transformer connections:
a. Jumper connections for 460 volt (see wiring diagram).
Table 4. Wiring Diagram
Power & Motor
Supply
L1 Hoist power supply
L2 Hoist power supply
L3 Hoist power supply
K21-2 + brake
K21-4 - brake
K10-1 T1, T7 motor supply
K22-4 T3, T9 motor supply
K22-6 T2, T8 motor supply
X1-11 T4 motor supply
X1-12 T5 motor supply
X1-13 T6 motor supply
Ground Terminals
Description
PE Motor
PE Control panel
PE Trolley connection
PE Power supply
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
Pendant Plug X23 Pin
Description No:
Common 1
Hoist UP 2
Hoist DOWN 3
Hoist FAST 4
Emergency stop 5
Trolley FWD 6
Trolley REV 7
Trolley FAST 8
Tag strip X1 Control Panel
Terminal No: Description
10 SD: low speed
1 Hoist UP
4 Hoist DOWN
6 D2: Trolley FWD
7 D1: Trolley REV
8 F: Trolley Fast
9 Control voltage
1-2 Thermal protection
2-3 Upper limit switch
4-5 Lower limit switch
K10 Mainline contactor
K21 Hoist UP contactor
K22 Hoist
Contactor
K25 Hoist FAST
T100 Control Transformer
9 Counter (option)
K22-22 Counter (option)
F100 630 mA
Plug Pin
No:
2
5
4
3
1
DOWN
42/85