List Of Tools Required - LaboGene Mars Service Manual

Edition 3 April 2012

2.2 List of tools required

For routine service testing, we recommend instruments in accordance with the requirements of EN 12469:2000 for the
testing of airflows / filters and containment testing.
For repair servicing the following tools may be required:
Socket wrench set
Slot-head screwdriver set
Phillips screwdriver set
Open-ended wrench set
Allen Key set
Multimeter
Diagonal cutter
Wire stripper
Flat connector pliers
Needle nose pliers
Tweezers
Starter punch
Spirit Level
Heat Gun
Soldering Iron
Solder
Cable ties
Shrink tube
Shrink tube with sealant
Flat connectors
Wire end ferrules
6 – 32mm
2 – 6mm
preferably magnetic
6 – 32mm
1.5 – 6mm
U / I / Ohm
small
small
small
small
small , black
6mm diameter
6mm diameter
6.3 mm
1mm²
Page 10/59
Mars/Mars Pro Service Manual